| | | Notice that this is a 1/8 BSP thread and you will need fittings and Tee in the same size/standard. I recommend model "Yellow, 25 kg". This model is in kg/cm2 which is almost the same as bar (1 bar = 1,01972 kg/cm2), but it's the among the few options that is small, liquid filled, with connector on the back, appropriate range and easy to find the fittings. | | | | | | | Male Fitting 1/8 BSP - OD 6, OD 4, 1/8 BSP | | | For Rancilio Silvia, I'm using OD 6mm, ID 4mm, 1/8 BSP. The male is type PC in this link. | 3.00 each (you will need 2 units) | | | | |
| Female Fitting 1/8 BSP - OD 6, OD 4, 1/8 BSP | | | For Rancilio Silvia, I'm using OD 6mm, ID 4mm, 1/8 BSP. The female is type PCF in this link,
Notice that if you select the option with OD=4 mm (external diameter), ID = 2.5 (internal diameter). Then, the PTFE tube needs to match these dimensions. | 3.00 each (you will need 1 unit) | | | | |
| | | | For Rancilio Silvia, I'm using OD 6mm, ID 4mm. Notice that if you have, for example a Philco, and select the fitting above with OD=4 mm (external diameter), ID = 2.5 (internal diameter). Then, the PTFE tube needs to match these dimensions. | | | | | |
| BS Female Female Male Tee 3 Ways | | | For Rancilio Silvia with PTFE tube, I'm using female-female-male, 1/8 BSP.
| | | | | |
| | | | Barb tail tee 6mm for Gaggia Classic Pro, Saeco Poemia and others | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| | | | | | | | | |
| Crimp clamps and crimper tool | | | If you are using barb tail fittings and don't want to use worm drive clamps | | | | | |
| Glycerin for the pressure gauge | | | Most will ship the pressure gauge without the liquid, but you can buy glycerin online or at a cosmetics store / pharmacy near your house. | | | | | |
| | | | | | | | | |